Material Compatibility Charts

Chemical Resistance of Pump Materials

The recommendations listed on the following page are based upon information from material suppliers and careful examination of available information and are believed to be accurate. However, since the resistance of metals, plastics, and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately the customer must determine the suitability of the pump used in various solutions.

Go to Chemical Resistance of Pump Materials

Chemical Resistance of Plastic Resins

The results shown herein are typical results that have been obtained in laboratory tests using bars molded from typical lots of resin. These results are for natural colors only. The addition of additives may alter some results.

In addition, design, processing methods and equipment, environment and other variables may affect actual part performance.

Go to Chemical Resistance of Plastic Resins

Chemical Resistance of Various Elastomers

The following pages are offered as a general guide and inspection of the suitability of various elastomers in use today for service in these chemicals and fluids. The ratings are based, for the most part, on published literature of various polymer suppliers and rubber manufacturers but, in some cases, they are the considered opinion of experienced compounders. We cannot guarantee their accuracy nor assume responsibility for use thereof. Several factors must always be considered in using a rubber part in service.

Go to Chemical Resistance of Various Elastomers